uTrust TS KEYPAD User Manual
1.0 Introduction
This document details the Physical Access Control Reader uTrust TS KEYPAD and its basic user
instruction and installation procedures.
2.0 Reader
2.1 Functionality
TS KEYPAD reader is a physical access control smart card reader that can read HF and LF
contactless credentials, conforming to the following standards: ISO 14443 A & B, ISO15693 with a
keypad PIN entry for additional security. The reader can interface with an access control system
equipped with a Wiegand or RS485 serial interface. User interfaces include RGB LED’s and Buzzer.
2.2 Front/Top Casing
To Next Page
Loading...