1.0 Introduction
This document details the Physical Access Control Reader uTrust TS KEYPAD and its basic user
instruction and installation procedures.
2.0 Reader
2.1 Functionality
TS KEYPAD reader is a physical access control smart card reader that can read HF and LF
contactless credentials, conforming to the following standards: ISO 14443 A & B, ISO15693 with a
keypad pin entry for additional security. The reader can interface with an access control system
equipped with a Wiegand or RS485 serial interface. It can also be interfaced with a Host Sever /
Control Panel that supports Ethernet interface. User interfaces include RGB LED’s and Buzzer.
2.2 Front/Top Casing
To Next Page
Loading...