iDevices IDEV0001 User Manual

iDevices Switch
v1.0
Think of a ‘Zone’ as a collection of rooms in your Home that you would
want to control simultaneously. For example, you may want to shut off your
‘Upstairs’ Zone or maybe the ‘Kids Bedrooms’ Zone.
o Scene
Set up customized ‘Scenes’ to control multiple products with a single
command. This might be, “I’m Going To Bed” where your bedroom lights shut
off and your fan turns on. ‘Scenes’ can be set to a reoccurring schedule or can
be on-command actions.
5. Problem Solving
The following information covers some of the most common troubleshooting
issues with the iDevices Switch. If you'd like more detail about your Switch and
it's capabilities, please visit our support site at idevicesinc.com/support, or give
us a call Monday-Friday from 8am-8pm EST.
5.1 Factory Reset
To reset the unit to its factory condition, hold down the button for 10 seconds,
the unit will momentarily flash red, white, and then restart the pairing sequence
with a fast blue blink.
5.2 I’m experiencing issues with the iDevices Connected
App
The iDevices Connected app requires iOS 8.0 or greater
5.3 I don’t have a device to pair to my Switch, can I still
use it?
You will have the ability to manually turn the Switch on and off using the button
located on the side
5.4 Night Light Color Codes
The iDevices Switch uses the nightlight LEDs to indicate the status or mode of the
Switch during and after initial setup. Typically the LEDs are only used when there is no
other means to inform the user of the status of the Switch.

iDevices IDEV0001 Specifications

General

Brand	iDevices
Model	IDEV0001
Category	Switch
Language	English