2
REQUIRES
• Wi-Fi
®
2.4 GHz 802.11 b/g/n
Compatible Network
• Router Security Settings
Supported: WPA, WPA2, Or None
• Free iDevices
®
Connected App
• 120VAC “Line” (usually black,
blue or red) And “Neutral”
(usually white) Wires In Each
Gang Box
• Controlling this HomeKit-enabled
accessory requires an iPhone,
iPad, or iPod touch with iOS 8.1
or later.
• Android™ 4.3+ Device With
Bluetooth
®
Technology
TOOLS NEEDED
• Philips Screwdriver
• Flathead Screwdriver
• Pliers
• Wire Cutter/Stripper
• Voltage Detector
RATINGS
Input: 120-277VAC, 50/60Hz
Output: 120-277VAC, 50/60Hz
Resistive: 1800W @ 120-277VAC, 15A/6.5A
Tungsten: 960W @ 120VAC, 8A
Tungsten: 1800W @ 277VAC, 6.5A
Motor: 1HP @ 120 & 277VAC
Ballast: 10A @ 277VAC
To Next Page
Loading...
Need help?
General
