iDevices Wall Switch - Page 5

5
• Wherever possible, install the iDevices
®
Wall Switch in a non-
metallic gang box and use a non-metallic faceplate, as metal gang
boxes and faceplates can decrease the Wi-Fi
®
signal strength.
• Check that your mobile device is compatible with the iDevices
®
Wall Switch at iDevicesinc.com/Compatibility
• It is YOUR responsibility to be sure that products are installed in
accordance with applicable building codes. Check with your local
building ofce if you have questions.
• Download the free iDevices
®
Connected app.
• For 4-way congurations, visit:
iDevicesinc.com/Support/WallSwitch/Setup