Name: Idex FAST & FLUID Galileo
Brand: Idex
Rating: 5 (1 reviews)

Questions and Answers:

M
Michael MyersJul 26, 2025
What to do if my Idex FAST & FLUID Galileo displays E-3 ERROR 3?
- B
  Brad FinleyJul 26, 2025
  If your Idex Mixer displays E-3 ERROR 3, try the following: * Increase the distance pressing the key “D” before beginning. * Regulate or replace the belt. * Clean the PCB3 board sensor. * Push the “STOP” key before starting the mixing cycle. * Check for a Loosen/broken belt for closing plates. * Check for a Defective cable between Logic board and Optical sensors. * Examine the sensor for closing (on optical sensors board) for damage. * Inspect the Optical sensors board for defects.
M
Mary JacksonAug 2, 2025
What to do if Idex Mixer is unable to find loading position?
- S
  Steven GreenAug 2, 2025
  If your Idex Mixer is unable to find the loading position, you should first try cleaning or replacing the sensor of zero position. If that doesn't work, the Optical sensors board might be defective.
R
Roger ThomasAug 9, 2025
What to do if Idex FAST & FLUID Galileo Mixer speed selection is wrong?
- J
  Jennifer YoungAug 9, 2025
  If the speed selection on your Idex Mixer is wrong, ensure that you select the slow speed (B) when using cans heavier than 7 Kg.
K
Katherine RichardsonAug 16, 2025
How to fix a defective emergency push button on Idex FAST & FLUID Galileo?
- J
  johnsonheatherAug 17, 2025
  To address a defective emergency push button on your Idex Mixer, try turning the emergency push button clockwise. Also, check the wire connections on the emergency push button.

Idex FAST & FLUID Galileo Specifications

General

Brand	Idex
Model	FAST & FLUID Galileo
Category	Mixer
Language	English

Idex FAST & FLUID Galileo User Manual

Table of Contents

Questions and Answers:

Idex FAST & FLUID Galileo Specifications