Why is my Idis DVR unable to display live video?
If your Idis DVR is unable to display live video, check the camera's power settings and the camera lens settings. Also, verify that the camera is actually powered on.
How to fix Idis PoE-enabled camera that will not turn on?
If your Idis PoE-enabled camera will not turn on, check the network cable and replace it to try again. Also, check that the PoE adapter is properly connected.
General| System | Embedded Linux |
|---|---|
| Video Input Channels | 32 |
| Compression | H.264 |
| HDD Bays | 8 |
| Max HDD Capacity | Up to 48TB (8 x 6TB) |
| RAID | RAID 0, 1, 5, 10 |
| e-SATA | 1 |
| Alarm Input | 16 |
| Alarm Output | 4 |
| Power Supply | 100-240VAC, 50/60Hz |
| HDMI Output | 1 |
| VGA Output | 1 |
| Video Output | 1 HDMI, 1 VGA |
| Audio Output | 1 channel, RCA |
| Recording Resolution | Up to 1080p |
| USB | 2x USB 2.0 |
| Network Interface | 1x RJ-45 (10/100/1000Mbps) |
| Protocols | TCP/IP, DHCP, PPPoE, DDNS, NTP, SMTP |
| Dimensions (W x D x H) | 440 x 430 x 88 mm (17.3" x 16.9" x 3.5") |
To Next Page
