Why I am unable to display Live video on my Idis DVR?
If you're unable to display live video on your Idis DVR, check the camera's video cable connection status, the monitor's video cable connection status, the camera's power settings, the camera lens settings, and the current main monitor resolution.
How to troubleshoot an Idis TR-4516 DVR that won't turn on?
If your Idis DVR won't turn on, check the power cable connection status and the power outlet.
Covers instructions, cleaning, attachments, water, ventilation, and placement guidelines.
Addresses power, lightning, overloading, and protection from objects and liquids.
Outlines the steps for initial DVR configuration including date, time, and recording.
Guides through network configuration, including internet connection and FEN setup.
Covers system requirements, installation steps, and launching the IDIS Center program.
General| System | Embedded Linux |
|---|---|
| Video Input | 16 channels |
| Video Output | HDMI, VGA |
| Audio Input | 16 channels |
| Audio Output | 1 channel |
| USB Interface | 2 USB 2.0 ports |
| Hard Disk | SATA |
| Network Interface | 1 RJ-45 (10/100/1000 Mbps) |
| Power Supply | DC12V |
| Compression | H.264 |
| Weight | 3.5 kg |
To Next Page
