IDS GeoRadar s.r.l. MN/2017/011 Rev 1.0 18/ 38
Battery charger
The battery charger (Fig. 16) has to be connected to the electricity mains at
AC 110/220V.
It is composed of three parts: an electrical transformer, a cable from
transformer to the main AC, and battery housing. (see Fig. 16).
The battery charging is concluded when the Led becomes green.
Fig. 16 – Battery charger components
Accessories
Reflective Bars for system positioning
The C-Thrue is also provided with positioning bars kit (Fig. 17 and Fig.
18allowing the User to create a local reference system axis. Thanks to their
reflective side (Fig. 19), Lasers are able to detect them, measuring
distances.
Fig. 17 – Positioning bars
To Next Page
Loading...