12
4.2. Interface Mode Setting Codes
VALUESCAN III supports USB HID and virtual COM. By
default, your scanner can detect the interface
automatically. When it detects USB, it selects HID as the
interface.
Note: If you use the scanner to communicate with your
computer via a serial interface (e.g., COM1 ... COM8), but
your computer does not have a serial port, the scanner
requires a virtual COM port driver. Use this driver to
assign a virtual COM port connection number to devices
connected via a USB port and to enable bidirectional
communication between your computer and the
VAUESCAN III.
To get the USB virtual COM port driver, go to the ID TECH
global website (https://idtechproducts.com/).
Download and install the driver. After installing the
driver, restart your computer. The system will then
automatically detect your scanner.
To Next Page
Loading...
