IDTECH ValueScan III - Adding an Exclusive Suffix Code

54
For example, to add the common suffix code A, the
hexadecimal setting code is 02110041; to add the
common prefix code A, the hexadecimal setting
code is 02160041.
Additionally, you must add a character after the
barcode and then add Enter. To add the character +
after the bar code and then add Enter, use the
setting code 0213@+\r; the suffix code is
0212@non-accumulative, 0213@accumulative 2
times, and 0211@accumulative 3 times.
5.2. Adding an exclusive suffix code
One type of barcode must be added with an exclusive
suffix code. For example, the Code 128 codes must be
followed by the letter A; there are two ways to do so:
To accumulate, use 0213A and 0211A.
Refer to Table 1 for other types of barcodes.