IDTECH ValueScan III - Page 52

52
Disable GS1 Omni-directional
(default)
01670
GS1 Omni ID as j
0168j
Enable GS1 Limited
01771
Disable GS1 Limited (default)
01770
GS1 Limited ID as k
0178k
Note: The setting code type is code128. When
generating a barcode, you must add ^3 before the
barcode; for example: ^3+****** (required barcode).
The ASCll codes in this table are all decimal. For the
hexadecimal, please refer to ASCII Table 2
.