IDVille ID MAKER Primacy

Need help?

Do you have a question about the IDVille ID MAKER Primacy and is the answer not in the manual?

Summary

Section 1: Getting Started

1-3 a Connecting the Printer

Provides instructions for connecting the printer to the power supply and USB.

1-3 b Ribbons

Explains how to fit ID Maker original High Trust ribbons and their benefits.

1-3 c Cards

Details the procedure for loading cards, including specifications and handling.

Printer Component Management

Section 2: Printing

2-1 Installing the Print Driver

Guides on installing the print driver from the provided CD for Windows/Mac.

2-2 Managing the Print Settings

2-3 Notification of Messages and Warnings

2-4 Printing a Card

Provides an example of setting up Microsoft Word for card printing.

2-5 Double-Sided Printing

Describes how to obtain and install a double-sided printing upgrade kit.

2-6 Connecting to a Network (Ethernet and Wi-Fi)

Explains network connection options and user-definable settings.

Section 3: Maintenance

3-1 General Warranty Information

Emphasizes adherence to maintenance for warranty coverage and printer longevity.

3-2 Routine Printer Cleaning

Explains the link between cleaning, print head warranty, and cleaning warning triggers.

3-2 b Servicing the Print Head

Recommends cleaning the print head using cotton buds and precautions to avoid damage.

3-3 Advanced Cleaning

Recommends an advanced clean every five routine cycles using a maintenance kit.

3-3 b Servicing the Print Head

Details using a cleaning pen for print head servicing, including precautions and steps.

3-3 c Servicing the Dust Filter

3-3 a Routine Printer Cleaning

Section 4: Help and Troubleshooting

4-1 Warnings and Diagnosis

4-2 Diagnosis Help

4-3 Troubleshooting Printing Problems

Provides steps for printing issues like no print, blank cards, poor quality, and jams.

Poor Print Quality

Partial or Incorrect Printing

4-3 b Freeing Jammed Cards

Provides instructions for removing jammed cards and preventive measures.

4-3 c Replacing the Print Head

Explains the print head's importance and advises contacting IDville before replacement.

Step 1 - Removing the Defective Print Head

Details the procedure for safely removing the old print head from the printer.

Step 2 - Installing the New Print Head

Provides step-by-step instructions for installing a new print head correctly.

Step 3 - Configuring the New Print Head

Guides on configuring the new print head in ID Maker Print Center using the PKN number.

4-3 d Updating the Firmware (under Windows)

Explains the process of updating printer firmware via the IDville website.

4-3 e Updating the Print Driver

Guides on updating the printer driver from the IDville website for fixes or new options.

4-4 Technical Support

Blank Card Ejected

Step 4 - Cleaning the Printer

Emphasizes necessary cleaning after print head replacement and waiting period.