IDW GCG-10 User Manual

Instruction Manual
STARTUP, OPERATION AND TEMPERATURE ADJUSTMENT
Operation
•Priortostockingcoolerwithproduct,itshould
beoperatedemptyforhalfanhour.
Temperature Adjustment
REPAIR AND MAINTENANCE FOR REFRIGERATION DRAWER
* A CERTIFIED TECHNICIAN IS REQUIRED TO REPAIR ALL
REFRIGERATION COMPONENTS FOR WARRANTY PURPOSES.
Forconvenientrepair,therefrigerationcomponents(compressor,
evaporator,condenser,evaporationfan,condensationfanandlter)are
designedusingasplitsystem;anycomponentcanbeeasilyreplaced.
Replacementprocedureisasfollows:
1Unplugtheunit.
2 Removethescrewsfromthefrontgrill,andthenremovethegrill.
3 Unplugallconnectionsandterminalsthatareinneedofrepair.
9
• G-10f/GCG-10fperformancetestingpositionofthe
thermostatisaround4~6.
4 Usingascrewdriver,removethe(3)screws
fromtherefrigerationdrawerbaseplate.
5 SlidetheRefrigerationDrawerouttoeasilyaccess
refrigerationcomponents.Removethecomponenttoreplaceor
repair.
6 Afterrepair,re-installallpartsusingthereverseprocedure.
Lit Door “Logo”
Switch
Operation
• ForGCG-10f
coolersonly.
Thelightswitch
locatedatthebottom
lefthandsideontherearofthe
cabinetistheON/OFFswitchforthe
Litlogolocatedonthedoorofcooler.

IDW GCG-10 Specifications

General

Brand	IDW
Model	GCG-10
Category	Refrigerator
Language	English