IEC 30 Series - Page 2

•••••••••••••••••••
ii
WARRANTY
•
Interstate Electronics Corporation warrants its function generators
against defects in material and workmanship for a period of one year
from date of shipment. We will repair or replace defective products
during the warranty period provided that such defect developed under
normal and proper use and that transportation costs are paid by the
purchaser. We are not liable for consequential damages nor is any
other warranty expressed or implied.
RECEIVING AND INSPECTION
Immediately upon receipt of the instrument, inspect the exterior of
the shipping container for physical damage and notify carrier if
such damage is visible. After carefully removing aU packing mater-
ials, inspect the instrument to ensure that it is free of mars and
blemishes.
CLAIM FOR DAMAGED SHIPMENT
If damage has occurred, a claim should be made with the carrier.
The claim agent should receive a complete report of damage and
•
a copy of the report should be sent to lEe. After receiving this
report, IEC will advise you of the disposition of the instrument and
arrange for its repair or replacement.
POWER
This instrument operates from a-c power only, either 115 or 230
vac, 50 to 400 Hz. A slide switch at the rear of the equipment readily
selects the desired power line voltage.
: CAUTION:
....................
Operation at the wrong power line voltage switch setting may damage
the instrument.
PERFORMANCE TESTS
Electrical performance tests should be concluded as soon as possible.
See paragraph 4- 2. Section 4.
•