IEC 30 Series - Test Equipment Required

4-2
SECTION 4
TABLE
4-1. TEST EQUIPMENT REQUIRED
•
General Requirements
For Calibration
Suggested Model
Test Equipment
Digital Voltmeter
Counter
RF Voltmeter
Oscilloscope
Voltage Source
Function Gener-
ator or Oscillator
Distortion
Analyzer
John Fluke 8300A
HP 5326A
Boontoon 91C, D,
or HP 3406
Tektronix 453, 454
or 585
Electronic Develop-
ment Corp MVlOON
IEC F31-F34 or
IEC F51-F55
HP 333A
DC:
1-mv resolution up to 15.0 vdc.
AC: Average reading 1-nw resolu-
tion up to 10 vac.
FREQ: 5-digit resolution up to
5 MHz.
PERIOD: 200 sec with O.l-sec
resolution.
TIME INTERVAL:
50-MHz bandwidth and O. I-db
resolution.
50 MHz bandwidth.
0.1 v/cm vertical sensitivity.
10.0v maximum.
•
Settable to 1.0 my.
10v
p-p sinewave into 50 ohms.
FREQRANGE:
5 Hz to 600 kHz.
Distortion introduced by instrument:
<0.03 percent from 5 Hz to 200 kHz.
<0.06 percent from 200 to 600 kHz.