This document provides a comprehensive guide for the IFAN 3IN1 Portable Air Conditioner, Model IF9010, which functions as an air conditioner, fan, and dehumidifier.
Function Description
The IFAN 3IN1 Portable Air Conditioner is designed to provide cooling, air circulation, and dehumidification for indoor spaces. It is a versatile appliance suitable for various environments, offering a 3-in-1 functionality to meet different climate control needs. The device is portable, allowing for easy movement and placement in different rooms. It features a climate-friendly refrigerant and is designed for energy efficiency, as indicated by its A++ energy rating.
Important Technical Specifications
- Model: IF9010
- Rated Voltage: 220-240 V ~50-60 Hz
- Power: 1130 W
- Cooling Capacity: 10000 BTU
- Air Flow Volume: 350 m³ per hour
- Dimensions: 368 x 358 x 713 mm
- Weight: 27 kg (gross) / 24 kg (nett)
- Cooling Area: Approximately 350 sq ft
- Refrigerant: Climate-friendly
The appliance includes a control panel and a remote control for convenient operation. Key components include a top cover, air outlet louvre, front housing, base plate, decorative box, side plate, rear housing, and casters for mobility. Installation involves an exhaust pipe assembly and a window sealing plate assembly, which are crucial for proper ventilation. The exhaust pipe length is adjustable between 280 mm and 1500 mm.
Usage Features
The IFAN 3IN1 Portable Air Conditioner offers several modes and settings for user convenience:
Control Panel and Remote Control:
Both the LED control panel on the unit and the remote control allow users to adjust settings.
Modes:
- FAN Mode: Provides air circulation with adjustable high or low wind speed.
- DEHUMIDIFY Mode: Removes moisture from the air. In this mode, the wind speed is permanently set to low. Continuous drainage is an optional feature for this mode.
- COOL Mode: Provides cooling with adjustable temperature settings and wind speed (high or low).
Settings:
- TIMER: Allows users to set an operating duration from 1 to 24 hours. When the appliance is ON, pressing TIMER exits the timer function. When OFF, pressing TIMER inputs the timer setting.
- SPEED: Toggles between HIGH and LOW wind speed in FAN and COOL modes.
- UP/DOWN: Adjusts temperature settings in COOL mode or timer settings.
- SLEEP: Activates energy-saving operation in COOL mode. This function is not available in DEHUMIDIFY or FAN modes.
- POWER: Turns the appliance ON or OFF.
- WATER FULL Indicator: A lamp and buzzer will activate when the internal water pan is full, indicating the need for drainage.
Installation:
- Preparation: Before use, the portable air conditioner must be kept upright for at least 2 hours. Ensure it is placed on a horizontal and dry surface.
- Exhaust Pipe Assembly: Screw the exhaust pipe assembly into the exhaust port on the rear panel.
- Window Sealing Plate Assembly: Mount the window sealing plate assembly to the window, either horizontally or vertically, adjusting its components to fit the window frame.
- Placement: Position the main body with the installed exhaust pipe assembly at least 50 cm away from walls or other objects to ensure adequate air circulation.
- Exhaust Pipe Connection: Elongate the exhaust pipe and snap its flat end into the hole of the window sealing plate assembly. Ensure the exhaust pipe is not distorted or turned at an angle greater than 45° to maintain proper ventilation and prevent overheating.
Safety Functions:
- Frost Protection: In COOL, DEHUMIDIFY, or SLEEP modes, if the exhaust pipe temperature is too low, the appliance enters a protection status and automatically reverts to normal operation when the temperature rises.
- Automatic Defrosting: The appliance has an automatic defrosting function.
- Compressor Protection: A 3-minute delay booting protection function is implemented after the compressor is turned off to extend its service life.
- Overflow Protection: When the water pan exceeds the warning level, an alarm sounds, the "FULL" indicator flashes, and the appliance stops operating. It will resume normal operation after the water is emptied.
Maintenance Features
Cleaning:
- Safety First: Turn off the wall switch and unplug the power cable before any cleaning.
- Surface Cleaning: Clean the appliance surface with a wet, soft cloth. Avoid using chemicals like benzene, alcohol, or gasoline, as they can damage the surface.
- Filter Screen Cleaning: The filter screen should be cleaned every two weeks, or more frequently if it becomes clogged with dust, to maintain appliance effectiveness.
- Upper Filter Screen Frame Cleaning:
- Clasp the wedging block of the EVA filter screen frame and force it down from the outside to remove it.
- Unscrew four screws fixing the EVA filter screen and the rear housing to fully remove the EVA filter screen.
- Wash the EVA filter screen in warm water (approximately 40°C/104°F) with a neutral detergent.
- Rinse it clean and dry it in the shade before reattaching.
Drainage:
The appliance requires drainage when the water pan is full. There are two methods:
-
Manual Drainage:
- Turn off the wall switch and unplug the power cable.
- Move the appliance to a toilet or other drainage area.
- Unscrew the drainage plug from the drainage hole. Water will automatically flow out. The appliance may be tilted slightly backward to facilitate drainage.
- Securely re-attach the drainage plug. Restart the appliance immediately to prevent condensate water from flowing onto the floor.
-
Continuous Drainage (Optional, DEHUMIDIFY mode only):
- Turn off the wall switch and unplug the power cable.
- Unplug the rubber stopper from the continuous drainage hole.
- Insert a water pipe into the water outlet and place the other end into a bucket. Water will continuously flow into the bucket.
Storage Instructions (After Manual Drainage):
- Repeat the manual drainage steps.
- Restart the appliance in COOL mode with LOW Wind Speed until the drainage pipe is dry, then switch off and unplug.
- Wrap the power cable around the wrapping post.
- Remove the exhaust pipe.
- Cover the appliance and the exhaust pipe separately in plastic bags and store them in a dry place, out of reach of children, with dust control measures.
- Remove the battery from the remote control.
Troubleshooting:
The manual includes a detailed troubleshooting guide for common issues such as:
- Appliance not responding to button presses (e.g., damaged power cable, fuse, control panel, or dead remote control batteries).
- "FULL" indicator display (requires water drainage).
- Ambient temperature issues (too low or too high for operation).
- Room temperature lower than set temperature in COOL mode.
- Low ambient temperature in DEHUMIDIFY mode.
- No air flow (e.g., damaged compressor, loose wiring).
- Air not cool enough (e.g., direct sunlight, open doors/windows, clogged filter screen, blocked air inlet/outlet).
- Compressor not working (overheat protection activated).
- Appliance making noise (not placed on a flat surface).
- Remote control not working (too far, not aligned, dead batteries).
- Error codes 'E1' (Pipe Temperature Sensor abnormal) and 'E2' (Room Temperature Sensor abnormal).
Warranty:
The appliance comes with a two-year warranty covering defective materials and manufacturing faults. It does not cover normal wear and tear, consumable materials, or damage from misuse, accidents, or unauthorized repairs. Service is performed at a specified location in Singapore, with a transport fee for doorstep service. Proof of purchase and warranty registration are required for service. The warranty is void if the serial number is altered or if defects are caused by external factors like pests, fire, or abnormal voltage. Online warranty registration is available.
Need help?
General
To Next Page