EasyManua.ls Logo

iFan IF9010 - How to Clean

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO CLEAN s
Warning: The appliance is fully assembled. DO NOT operate the appliance with any
of its parts disassembled. The entire assembled unit works as a single appliance. The
appliance must only operate in the upright position. Any other position will be
hazardous.
1.
Turn the wall switch OFF and unplug the power cable from the wall socket.
2.
Clean the surface
Clean with surface of appliance with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the appliance will be
damaged.
3.
Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the appliance is
reduced, clean the filter screen once every two weeks.
4.
Clean the upper filter screen frame
Clasp the wedging block of the EVA filter screen frame with hands. Force down from
the outside to remove the EVA filter screen frame. Unscrew four screws fixing the EVA
filter screen and the Rear Housing to remove the EVA filter screen (as shown in the
figure below).
Put the EVA filter screen into warm water with neutral detergent (about 40°C/ 104°F)
and dry it in the shade after rinsing clean.