38
cloth to clean the oven cavity and door.
DEODORIZE
This function can flash the air in the oven. Empty the oven before using it.
1. Make sure the oven is empty, and then close the door.
2. Touch STEAM CLEAN/ DEODORIZE/DISINFECT pad twice.
3. Touch START/EXPRESS COOK pad.
DISINFECT
1. Touch STEAM CLEAN/ DEODORIZE/DISINFECT pad thrice.
2. Touch START/ EXPRESS COOK pad.
POWER SAVE
When the oven isn’t used, you can set power save mode.
In standby state, press POWER SAVE pad, then the display will be black. The system enters into power
save mode until you press any pad or open the door.
AUTOMATIC PROTECTION MECHANISM
1. When the system enters into super high temperature protection status, the digital display shows
“E01” and continues to beep till the system comes back to normal condition and then press
“STOP/RESET”.
2. When the system enters into super low temperature protection status, the digital display shows
“E02” and continues to beep till the system comes back to normal condition and then press
“STOP/RESET”.
3. The system enters into protection mode when the system sensor is Short Circuited. The display
shows “E03” and continues to beep until pressing “STOP/RESET” button. Call consumer service to
check and replace the faulty sensor.
COOLING FEATURE
This system of the microwave oven has the feature of cooling. As for any cooking mode which cooking
time above 2 minutes, after finishing cooking, the oven fan will work about 3 minutes automatically to
cool the oven for prolonging the life of the oven.
To Next Page
Loading...
