ifi ZEN CAN - Page 2

10 11 12 13
10. Balanced 4.4mm analogue input
This is a balanced analogue input.
11. Single-ended 3.5mm input
For connecting single-ended 3.5mm input.
12. RCA analogue input
This is an analog ue input.
13. Balanced 4.4mm analogue output
14
This is an analogue output via 4.4mm > X LR or other balanced
interconnects. You could use this for an active speaker.
Tip: As ZEN CAN Is balanced, this is the recommended output.
14 . DC SV power
Pl ease connect Z EN CAN to the enclosed power s upply ,
ZEN CAN mu st ON LY be powered by 5 volts.
Tip: For best performance upgrade the enclosed power supply to a super-low
noise power adapter such as if/ iPower or iPower X.
Specifications
Input voltage:
Max Output:
Balanced:
S-E:
THD&N :
Balanced:
S-E:
SNR:
Balanced:
S- E:
Max.Input :
Balanced:
RCA :
3.5mm:
Gain:
Frequency Response:
Power consumption:
Dimensions:
N et weight :
War rant y p erio d:
DC 5V/2.5A
AC 100 -240V, 50/60Hz (Power s upply Inc lud ed)
> 15.1 V/385 mW(@ 600 Ohm)
>11.0V/1890 mW( @64Ohm)
>6.2V/1200 mW (@32 Ohm)
>7.6V/98 mW (@600Oh m)
>7.4V/870 mW (@64 Ohm)
>7.2V/1600mW (@32 Ohm)
<0.006% (@ 360 mW/2.4V 16 Ohm)
<0.005%(@ 100 mW/1.27V 16Ohm)
> 120dBA (@ 15.2V)
> 11 SdBA (@ 7.6V)
7.4VRMS
3.SVRMS
l.92VRMS
0dB, 6dB, 12d8 and 18d8
1 0Hz- 200kHz (-3d8)
No Signal -SW
Max Sig nal -13W
158x117x35mm
6.2" X 4.6" X 1.4"
515g(1.141bs)
12 months
Sptti6cotlons are subject to change without no tin.
ifi -aud io .com
Verl .1