To Next PageTo Next Page
Need help?Do you have a question about the ifi Hip-Dac and is the answer not in the manual?
General| Type | Portable DAC/Amplifier |
|---|---|
| Output Power | 400mW @ 32Ω |
| Outputs | 3.5mm Unbalanced, 4.4mm Balanced |
| DAC Chip | Burr-Brown |
| Weight | 125g |
| MQA Support | Yes |
| Output Impedance | <1Ω |
| THD+N | <0.005% |
| Charging | USB-C |
| Inputs | USB Type-A |
| Frequency Response | 20Hz - 20kHz |
| PCM Support | Up to 384kHz |
| DSD Support | DSD256 |
| Dimensions | 102 x 70 x 14 mm |
Enables matching headphones' impedance and sensitivity for optimal operational efficiency.
An analogue circuit to restore lost bass response for accurate music reproduction.
Indicates the audio format and sampling frequency received from the music source via LED color.
Features analogue volume control and safety warnings for high power output.
Details for connecting balanced 4.4mm and single-ended 3.5mm headphones.
Connects to phones via Lightning/OTG cables; USB 3.0 port preferred for PC connection.
For charging the device via USB-C; takes approximately 3 hours for a full charge.
Indicates battery level with specific LED colors: White, Green, Red, and flashing Red.
Lists supported audio formats like DSD, DXD, PCM, MQA and digital input types.
Details headphone output power, battery capacity, and charging system.
Provides dimensions, weight, and warranty period for the device.
Links for downloading the user manual and related product references.
