Need help?Do you have a question about the ifi SMX100 and is the answer not in the manual?
Provides instructions for qualified technicians to wire the MS Connector for power.
Informs qualified personnel about operating and maintenance procedures.
Lists minimum performance characteristics at the time of delivery.
Safeguards built into the SMX100 against adverse electrical conditions.
Identifies and describes front and rear panel controls and indicators.
Explains the function of indicators like Fault, Hi VSWR, RMT/LCL, and TOTL/OPRT HOUR.
Describes the function of controls like Local, ALC Switch, Power ON/OFF, and FLT/RST.
Explains the purpose and location of Amplifier Data Sheets.
Details how to set the GPIB address using the control knob and RETURN button.
Explains how to apply power and what the initial display shows.
Covers controlling output power, input signal levels, and sample RF output cautions.
Describes features like high gain, wide frequency range, and band switching.
Explains manual gain adjustment via a front panel potentiometer.
Describes optional features like the Interlock Feature for safety.
Describes the three positions of the ALC switch: 'INT', 'OFF', and 'EXT'.
Details the procedure for internal leveling using the 'INT' position of the ALC switch.
Explains how to use the external leveling mode with a voltage reference source.
Explains remote operation via computer using the GPIB interface.
Describes how the amplifier switches to REMOTE operation when a GPIB command is received.
Details setting the GPIB address via the front panel control knob at startup.
Lists IEEE commands for amplifier function and status requests.
Lists codes for requesting power and metering status from the amplifier.
Provides instructions for connecting and communicating via the RS-232 serial port.
Focuses on ensuring cooling vents are not obstructed for proper airflow.
Advises against operator servicing, recommending qualified personnel for troubleshooting.
Outlines the steps for returning equipment for repair or calibration, including RMA.
Contains specific data sheets measured for the amplifier.
Lists various drawings and diagrams associated with the amplifier.
To Next Page
General
