ifi SMX100 - Entering the GPIB Address

Page
15
4.5.3 - Entering the GPIB Address
FIGURE 4.0 - GPIB ADDRESS MENU
From the START-UP Menu in Figure 3.0, press the button located under the GPIB ADDR indication
on the display. In this screen, Figure 4.0, the GPIB Address is entered by dialing in the desired
number using the Control Level Adjust knob and pressing the RETURN button. The START-UP
Menu in Figure 4.0 will be displayed after pressing the RETURN button.
Wait approximately 5 seconds (or press the Continue (CONT) button) for the Main Menu, as seen in
Figure 3.0.