Need help?Do you have a question about the IFM AC1422 and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Operating voltage | 18...30 V DC |
| Power consumption | Max. 4.8 W |
| Protection class | III |
| Ambient temperature | -25...60 °C |
| Connection | M12 connector |
| IO-Link revision | 1.1 |
| Communication interface | Ethernet, IO-Link |
| Ethernet | 10/100 Mbit/s |
| Protocols | Modbus TCP |
| Current consumption | 200 mA |
| Protection rating | IP 65 |
| Storage temperature | -25...+70 °C |
Provides essential safety guidelines for product use.
Explains the meaning of warning, caution, and notice symbols.
Lists necessary hardware components for programming.
Instructions for installing the CODESYS Development System.
Steps to install the ifm AS-i package for CODESYS.
Steps to configure the device-internal PLC.
Procedures for configuring the Ethernet interface and fieldbus stacks.
Importance of testing PLC applications for stable operation.
Steps to compile and transfer a CODESYS project to the device.
To Next Page
