Need help?Do you have a question about the IFM AC1402 and is the answer not in the manual?
General safety advice, adherence to operating instructions, and warning notes on the product.
Device must be installed and connected by qualified electricians for safe operation and warranty.
Tampering is forbidden, voids warranty, and can compromise safety; includes specific prohibitions.
Information on operating the AS-i system with appropriate power supply or data decoupling module.
Explains the pin assignments for terminal blocks X1, X2, X3, X6, and X7.
General safety advice, adherence to operating instructions, and warning notes on the product.
Device must be installed and connected by qualified electricians for safe operation and warranty.
Tampering is forbidden, voids warranty, and can compromise safety; includes specific prohibitions.
Information on operating the AS-i system with appropriate power supply or data decoupling module.
Explains the pin assignments for terminal blocks X1, X2, X3, X6, and X7.
General| Ethernet | 10/100 Mbit/s |
|---|---|
| Protection rating | IP 20 |
| Ambient temperature | -25...60 °C |
| Operating temperature | -25...60 °C |
| Housing material | Plastic |
| Connection | M12 connector |
| Protocols | Modbus TCP, EtherNet/IP |
| Operating voltage | 18...30 V DC |
To Next Page
