Need help?Do you have a question about the IFM AC1401 and is the answer not in the manual?
General| Model | AC1401 |
|---|---|
| Category | Gateway |
| Power Supply | 18...30 V DC |
| Ethernet | 10/100 Mbit/s |
| Temperature Range | -25...60 °C |
| Protection Rating | IP 20 |
| IO-Link Ports | 4 |
| Weight | 200 g |
| Communication Protocols | Ethernet/IP, PROFINET, Modbus TCP |
| Housing Material | Plastic |
General safety advice, observe instructions and warning notes on the product.
Device must be installed by a qualified electrician to ensure safe function.
Tampering is not allowed and voids liability/warranty, affecting safety.
The unit can be supplied by 24 V (AUX) or from AS-i, compatible with AS-i power.
Information on how to supply power to the device, requiring AS-i power supply or data decoupling module.
Details connecting the device with 24 V DC via AUX and AS-i lines via AS-i power supplies.
Explains connecting AS-i lines and the device using AS-i power supplies, including AUX jumper setting.
To Next Page
