11. PROBLEMS, CAUSES and SOLUTIONS
Electrical failure or lack of power
supply
Make sure that the main switch in
work position
Stove fire in self off and / or
the stove stops automatically.
The pellets feeder is empty.
Pellets feeder does not work.
Call the technical service
The door is not fully closed
Close the door or replace with
original spare parts.
Change to a type of pellets recommended by
the
manufacturer.
Combustion chamber dirty.
Guide to clear the combustion
Stove is working a few minutes
and then off
The ignition cycle is not
completed.
Re-run the ignition cycle (turn off).
There may be a temporary failure in
the power supply.
Check the conditions indicating a top.
Ignition spark plug failure.
Temperature sensors are defective or
damaged.
Call the technical service