EasyManua.ls Logo

iGenix IG7130 - Fuse Replacement; Trouble Shooting Guide

iGenix IG7130
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Problem Possible Cause Solution
Theminiovendoesnotwork. 1.Notproperlypluggedintothe 1.Pluginrmly
mains wall socket. 2. Check fuse or breaker.
2. No electricity in the mains 3. Check all settings according
wall socket. to this manual.
Smoke and a slight odour 1. Excess lubricants used in the 1. This is normal and the smoke
coming from the mini oven. manufacturing process. and smell will cease after a
short period of time.
Grill is not working. 1. Top elements are not 1. Turn the upper heater
turned on. switch on.
Condensation on the wall at 1. Water evaporating from 1. It is completely normal for
the rear of the mini oven. foods with a high water this to happen and when the
contente.g.frozenchips, ovenhascooledtheexcess
roast chicken etc. moisture can be wiped off.
Cooking fat is splattering. 1. Grill is set too high. 1. Reduce the temperature of
2. Shelf is too close to the grill. the grill.
2. Position the shelf lower
in the oven.
TROUBLE SHOOTING GUIDE
Fuse Replacement (Class I)
This appliance must be earthed. Remove the central screw on the plug and
open the shell. Take out the fuse and replace with a new fuse of the same Amp.
Install the shell again and tighten the screws.
MAINS PLUG FUSE REPLACEMENT
Disclaimer: Igenix operates a policy of continual improvement and development. We therefore reserve
therighttochange/alterthespecicationandappearanceofourapplianceswithoutpriornotice.All
diagrams and images shown in this manual are for illustration purposes only.

Related product manuals