English
PARTS AND FEATURES
1.temperature control adjustment 4.power on indicator(red)
2.vinyl coated wire basket 5.compressor on indicator(green)
3.inside drain dial
INSTALLING YOUR FREEZER
Unpacking your freezer
Remove all packaging material. This includes the foam base and all adhesive tape
holding the freezer accessories inside and outside.
Inspect and remove any remains of packing, tape or printed materials before
powering on the freezer.
Adjusting your freezer
your freezer is designed for freestanding installation only. It should not be
recessed or built-in.
place the freezer on a floor strong enough to support it fully loaded.
When moving the freezer, never tilt it more than a 45-Degree angel. This could
To Next Page
Loading...
