Igloo ICE102C-WHITE - User Manual

Questions and Answers

K
Kathryn Torres MDAug 6, 2025
What to do if the Igloo ICE102C-WHITE “Ice Full” and “Add Water” lights are on?
- M
  Marilyn JohnsonAug 6, 2025
  If both the “Ice Full” and “Add Water” lights are illuminated on your Igloo Ice Maker, it could be due to an electrical power surge, air in the lines, blocked lines, or the water tank's inability to detect the water level. Here's what you can do: * Turn off the icemaker, unplug it, add water if needed, plug it back in, and restart. * Inspect the parts; remove the drain cap at the back to drain a little water, then replace the cap and try again. * Check for ice blocking the ice pusher; turn off the unit, let the ice melt, and then restart. If the problem persists, contact Haier America Customer Service.
P
padillakathleenAug 11, 2025
What to do if my Igloo ICE102C-WHITE Ice Maker is not operating?
- C
  Cynthia PatrickAug 11, 2025
  If your Igloo Ice Maker isn't working, ensure it's properly plugged into a standard 110/120 Volt, 60 Hertz power source. Also, the unit should be operated in temperatures below 90°F, and colder water should be poured into the water reservoir.
M
michaelwilliamsAug 16, 2025
Why does the 'ADD WATER' light turn on in my Igloo Ice Maker?
- L
  Linda VillarrealAug 16, 2025
  The “ADD WATER” indicator light on your Igloo Ice Maker illuminates when the water level is low or there is no water in the unit. Add water, and the icemaker will resume operation automatically.
C
Carl HallAug 21, 2025
What to do if the Igloo ICE102C-WHITE Ice Maker “Ice Full” indicator light is on?
- J
  Joseph ColeAug 21, 2025
  If the “Ice Full” indicator light is on, it means the ice basket in your Igloo Ice Maker is full. Simply remove some ice from the ice storage basket to allow the unit to make more.
H
hannahpriceAug 27, 2025
What to do if my Igloo ICE102C-WHITE has an ice blockage and makes no ice?
- J
  Janice GallagherAug 27, 2025
  If your Igloo Ice Maker has an ice blockage and isn't producing ice, turn off the machine and allow the ice block to melt before restarting it. Alternatively, you can change the ice cube size selector to small ice cubes.
T
Trevor MartinSep 1, 2025
What to do if there is no indication on the control panel of Igloo ICE102C-WHITE Ice Maker?
- A
  Alexandria SchaeferSep 1, 2025
  If there is no display on the control panel of your Igloo Ice Maker, check that the plug is properly inserted into the electrical outlet.