Operation ICF18, ICF32, ICF40, ICF60, ICF80DZ
20
✔ The chosen compartment display blinks.
2. Use the “UP +” (fig. 3 7, page 4) and “DOWN –” (fig. 3 6, page 4) but-
tons to select the cooling temperature. Each compartment can be set to
work as a refrigerator or a freezer.
✔ The cooling temperature appears in the chosen compartment display for a
few seconds. The display flashes several times and then the current tem-
perature is displayed again.
6.7 Switching a compartment off or on (ICF80DZ)
If only one compartment is required, the other compartment can be switched
off to save energy.
Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
1. Press the “SET” button (fig. 3 5, page 4):
– Once for the large compartment
– Twice for the small compartment
✔ The display of the respective compartment blinks.
2. Press the “ON/OFF” button (fig. 3 1, page 4).
✔ “OFF” flashes for five seconds on the display of the respective cooling
compartment, then “OFF” is displayed.
Switching on a compartment
If the display of the compartment shows “OFF”, you can switch on the compart-
ment as follows:
1. Press the “SET” button (fig. 3 5, page 4):
– Once for the large compartment
– Twice for the small compartment
✔ The display of the respective compartment blinks.
2. Press the “ON/OFF” button (fig. 3 1, page 4).
The cooling temperature appears in the display for a few seconds. The dis-
play flashes several times and then the current temperature is displayed.
Igloo ICF18, ICF32, ICF40, ICF60, ICF80DZ_OPM_4445104001_APAC_en_202x-xx-xx.book Page 20 Thursday, September 28, 2023 6:55 PM
To Next Page
Loading...
