21
Emergency
Jumpstart
1. Connect the USB-A to USB-C cable to a power bank.
2. Plug the USB-C port into the jumpstart port on the lock.
3. Once the lock powers up, enter a valid PIN code within 20 seconds,
followed by to unlock.
Decoy PIN Code
1. Key in up to 8 random digits before your actual PIN code, followed by
to unlock.
Volume Control
To configure the volume of your lock:
*Please ensure you are within Bluetooth range of the lock and your Bluetooth func-
tion is turned on.
1. On your app, tap [Lock Settings].
2. Select [Volume].
3. Select the volume level from 0 to 5 (softest to loudest).
4. Tap [Apply Changes].
Keypad LED
Toggle
To configure the LED settings:
*Please ensure you are within Bluetooth range of the lock and your Bluetooth
function is turned on.
1. On your app, tap [Lock Settings].
2. Select [Keypad LED Toggle].
3. Turn it on or o.
4. Tap [Apply Changes].
This feature is switched on by default.
To Next Page
Loading...