EasyManua.ls Logo

iglooworks Padlock E - Troubleshoot; Shackle and Locking Issues; Battery and Power Issues; Keypad and Indicator Errors

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Troubleshoot
I am unable to close the shackle
to lock the padlock.
Do an unlock via PIN code or Bluetooth and try
to close the shackle again.
Note that you might accidentally lock the
padlock manually by holding the UNLOCK button
for 2 seconds when the padlock is open.
Make sure the Padlock E is unlocked before
turning the Torx cap to remove the battery cover
Note that the Torx cap cannot be turned while
the Padlock E is locked.
I am unable to turn the Torx Cap to
remove the battery cover.
Security Lockout is triggered on the Padlock E.
Please refer to page 20.
The padlock keypad flashes white
and LED indicator flashes red when I
activate the keypad.
Please ensure terminals of the 9V battery are in
contact with the jumpstart contact points of the
Padlock E for 2 seconds to activate the padlock.
The 9V Battery terminals must be in constant
contact with the padlock 9V contact pins while
unlocking it with PIN code or Bluetooth.
I tried to use a 9V Battery to
jumpstart the lock but to no avail.
Do a Bluetooth Unlock or sync and try again.
Ensure that the generated PIN codes are used
within the activation period.
I have generated my PIN codes from
the app but it cannot work.
The Padlock E is low in battery.
Use an Alkaline 9V Battery to jumpstart the
lock and unlock the Padlock E to replace the
batteries.
Refer to page 12 for steps on battery
replacement.
I tried to unlock the Padlock E
but the keypad went o and
came back on with 2 slow and
2 quick beeps.
The Padlock E’s battery is flat.
Use an Alkaline 9V Battery to jumpstart the lock
and unlock the Padlock E to replace the batteries.
Refer to page 12 for steps on battery replacement.
The lock is not responding at all.
Use the spare QR sticker that is provided in the
Padlock E box.
I can’t scan the QR sticker as it is
worned out.
Make sure Auto Lock is ON via the
iglooworks mobile app.
If Auto Lock is ON and the padlock is still not
working, try to lock the padlock manually by
holding the UNLOCK button for 2 seconds.
I closed the shackle but the padlock
did not relock automatically.

Related product manuals