Scooterpac Ignite Mini | User Manual 12
5.2 Unintentional Movement
Before operating, the Ignite Mini should always be stationary. When the Ignite Mini is switched on, it will remain stationary
until one of the following:
1. The forward or reverse lever is pulled/pushed.
2. The freewheel function is engaged.
Do not attempt to operate the scooter when standing beside.
If the scooter is moving an emergency stop can be performed by releasing the throttle levers and firmly pulling the hand-
operated brake lever on the right-hand side of the tiller.
To Next Page
Loading...