Scooterpac Ignite Mini | User Manual 28
7.13 Ch a r ge P o rt
Charging the Ignite Mini can be completed by using the charge port on the tiller.
The port is located on the tiller column on the right-hand side. To charge the scooter,
simply connect the supplied charge cable to the port.
When the Ignite Mini is in charge mode it will not enter drive mode.
TOP TIP – For best practice, please ensure to charge your batteries after each use.
You cannot overcharge them as your charger will automatically cut-off when it
detects they are full.
If there are long periods where you decide not to use your scooter, we recommend
that batteries are charged at least once a fortnight.
This will ensure they remain healthy and are ready for regular usage.
Figure 15 – Tiller mounted
charge port
To Next Page
Loading...