iHealth Gluco+ User Manual

EN
Wireless Smart Gluco-Monitoring System (iHealth
Gluco+) Quick Start Guide
For the rst time please use the charging line to activate the
blood glucose meter;
When changing the environment, the iHealth Gluco+ and
Test Strip should be placed in the same measurement
environment (10°C~40°C) for more than 30 minutes before
measuring.
1. Device for measurement
1
2
3
4
iHealth Wireless Smart Glucose Meter
iHealth Test Strip (EGS-2003 & EGS-2043)
Lancet
iHealth Lancing Device

iHealth Gluco+ Specifications

General

Brand	iHealth
Model	Gluco+
Category	Blood Glucose Meter
Language	English

Summary

Prepare the lancing device

Remove the lancing device cap

Insert new lancet

Twist lancet cover off

Replace lancing device cap

Adjust puncture depth

Twist until clicks

Clean before blood collection

Insert the test strip

Insert test strip into meter

Insert the test strip into the meter's strip port with the arrow facing the meter.

Meter starts and indicates readiness

The meter activates and shows a blood drop symbol, ready for sample.

Obtain a blood sample

Lance the finger

Press the lancing device against the finger and press the release button to lance.

Form a blood drop

Read the test results

Apply blood to test strip

Apply blood to the test strip's absorbent hole, filling the confirmation window.

View test result

The meter counts down and displays the test result on the screen.