OPERATION 9VX3
STARTING ENGINE
Check before Starting Engine
1. Sit on the operator's seat and adjust it to the condition
where the operation levers and pedals may be used
smoothly.
2. Make sure that the operation lock lever (1) is set at the
locked position.
3. Make sure that each lever is set at the neutral position.
4. Insert the key into the engine key switch (2). Turn it to
the ON (run) position and make sure of the following.
• The engine oil pressure warning lamp (3) and
battery charge warning lamp (4) are lit continuously.
(It is normal if the engine oil pressure warning lamp
and battery charge warning lamp turn off when the
engine starts.)
• Push the light switch (5) and make sure that the front
light is turned on.
• Push the horn switch (6 ) and make sure that the
horn sounds.
3-3-1
To Next Page
Loading...
