OPERATION 9VX3
BLADE OPERATION
Push down the blade/crawler select lever to the blade position and operate the blade/crawler
operation lever.
Blade raise: Pull the lever backward.
Blade lower: Push the lever forward.
BOOM SWING OPERATION
Open the pedal cover to the unlock position before starting operation. Step on the right or left
position of the boom swing pedal to operate the boom.
Right boom swing: Step on the right side of the pedal.
Left boom swing: Step on the left side of the pedal.
WB-C210170
WB-C210340
Put the pedal cover on the pedal and lock it when
boom swing is not carried out.
3-6-4
To Next Page
Loading...
