EasyManua.ls Logo

IHI 9VX3 - Page 86

IHI 9VX3
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION 9VX3
TOWING
"\
* Personal injury or death could result when towing a disabled machine incorrectry.
* Follow the recommendations below, to properly perform the towing procedure.
* Never use the towing hook at the rear axle to tow the machine.
* During towing operation, NEVER allow anyone between the towing machine and the towed
machine.
* Quick machine movement could overload the tow line or bar and cause it to break. Gradual
and smooth machine movement will work better.
* Keep the tow line angle to a minimum. Do not exceed a 30° angle from the straight ahead
position.
To prevent the damage of the wire rope, be sure to place a
protector at the corner of the axle.
If the machine sinks down on a soft ground and cannot crawl up
by itself,, a wire rope should be attached to the rear axle and
the machine should be towed by a towing machine.
Use the towing wire rope with sufficient strength to tow the
machine.
3-10-1

Related product manuals