iHome 5 - MONITOR AND SENSOR CONFIGURATION; Notification and Event Settings; Contact and Emergency Numbers; Audio, Display, and Recording

Monitor→Sensor Settings
 Push: System will send notifications to early binding cell phone.
Video Record: Monitor can record the videos after motion sensor is triggered. User can receive the latest records
on App
Video Call:Answer your door with a smart phone, after motion sensor is triggered, and you can see who is at
your door
 SMS: System will send SMS “Sensor warning from iHome” to preset cell phone number.
 Call: System will make voice call to preset cell phone number. You must have a SIM card installed and setup for SMS/voice
call to work properly. Note: The SIM card must be purchased separately; it is not included in this product package.
 Ring: System will alarm automatically when it detects body motion outside.
Master Number
 Set your cell phone number to receive voice calling or SMS from smart peephole doorbell system.
SOS Number
 Set your cell phone number, the police department, or other emergency number to receive SOS calling from smart
peephole doorbell system.
 Press SOS key of indoor monitor to call SOS number automatically.
Ring and volume for doorbell & alarm
 Integrated optional ringtones for alarm and doorbell.
 7 levels for ring tone volume, default MAX volume.
Set wallpaper
 Set favorite wall paper from system.
Set video record time in Message mode
 Set video record time at 5s, 10s, 15s, 20s.
Peephole view time
 Set view time at between 5-300s after short press the “peephole” button.
Led setting
 Auto: auto to open or close the infrared led according to the light conditions.