Configuration
2017-03-31 27
5.3.4 Main Menu Item 'Output Settings'
This menu offers specific settings for the output of the CPU Switch.
Menu View 'Output Settings'
Select output resolution:
'DDC': Use preferred resolution of the
monitor's DDC at the output
'Select': Select from predefined output
resolutions in the menu item 'Resolution'
'1:1': Use input resolution as output resolution
Note:
The option "DDC" is not available in onboard DVI-I
extenders.
If 'Output' is set to 'Select': Select from predefined
output resolutions.
A higher resolution can be selected at any time. If
you select a lower resolution, the number of output
pixels needs to comply with the following rule:
Horizontally: At least 50%
Vertically: At least 33%
(Not available with onboard DVI-I extenders.)
Adjust position of picture manually
Display of the selected output resolution
To Next Page
Loading...
Need help?
General
