ENGLISH
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and
because the Pixel Clock may not be adjusted correctly. If the flicker or blurs still
remain, set the refresh rate of computer to low (60Hz) and repeat steps from
again.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the
Pixel Clock and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
16 OPERATING THE MONITOR
7
8
3
6
7
PLE2200WS-e-M015A01.P65 9/7/2006, 8:56 PM20
To Next Page
Loading...
