ENGLISH
ENGLISH
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps
F
and
G
because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from
C
again.
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
HH
HH
H
Adjust the Brightness and Color Temp. to get the desired picture after you complete
the Clock and Phase adjustments.
Put back your favorite wallpaper.
GG
GG
G
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
+
–
17 OPERATING THE MONITOR
PLE485S-e.p65 2004/09/14, 17:2622
To Next Page
Loading...
