ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
[Fitting and Removal of Cable Cover]
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
< Fitting >
Remove the screw from the monitor as
shown in Step1.
Connect the cables, as shown in Step2,
place the cable cover and fi x it fi rmly using a
screw.
< Removal >
Remove the screw and the cable cover as
shown in Step3.
Step 3
MENU
ENTER
Cable Cover
Screw
Step 2
MENU
ENTER
Screw
Screw
Step 1
MENU
ENTER
To Next Page
Loading...
Need help?
General