ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 8mm(VESA mounting
holes) or 8mm(Outer mounting holes) to fasten the monitor. Using the screw longer
than this may cause electric shock or damage because it may contact with the
electrical parts inside the monitor.
WALL MOUNTING
WARNING
Screw
Chassis
Mounting Stage
L
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
specifi cation.
BUILT-IN EQUIPMENT
WARNING
To Next Page
Loading...
Need help?
General