English
5
3. When the selected mode has been loaded iRig BlueTurn’s BlueTooth LED will start to blink.
4. Pair the iRig BlueTurn with your deivice. For Bluetooth pairing, please refer to your device’s BlueTooth pairing
procedure. The BlueTooth LED will remain lit.
Please note: iRig BlueTurn is discoverable for 30 seconds at start-up (only after a mode has been selected). If
no device has been connected after this time, iRig BlueTurn will hide and must be turned off and on again.
5. Download and launch the app.
ikdownloads.com/irigblueturn
iKlip Stage
To Next Page
Loading...
Need help?
General