IK Multimedia IRIG MIC STUDIO - Technical Specifications; Warranty and Support Information

English
12
The iRig Mic Studio status LED is always dark blue and I don’t get any sound.
In order for iRig Mic Studio to turn on, a Core Audio-compatible audio app must first be launched on your iOS
device or Mac.
iOS: Be sure you are using an app that works with digital audio input from the 30-pin or Lightning dock
connector.
Mac: Be sure you have set “iRig Mic Studio” as the audio input device on the audio app you are using.
Specifications
- Type: Large diaphragm, back electret 1” condenser capsule
- Polar pattern: Cardioid
-Diaphragm:3μmNickelsputtered
- Resolution & Sample Rate: 24 bit, 44.1kHz / 48kHz
- Freq. response: 20Hz – 20kHz ±3dB
- Max SPL: 133dB SPL for THD=0.5%
- Sensitivity: -42±3dB (@1 kHz,0dB=1V/Pa)
- Gain range: 40dB
- 3,5mm headphone out jack
- Supply voltage: power supply via USB
- Multicolor LED for status and level indication
- Controls: Gain knob and headphone volume knob
- Size: Ø 45mm x 117mm
- Connection: Micro-USB
- 30-pins cable sold separately
Warranty
Please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.
Support and more info
www.ikmultimedia.com/support
www.irigmicstudio.com
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.