English
9
Setting optimal gain
Check the status LED when singing or talking into iRig Mic Studio.
•IftheLEDisalternatingbetweenBLUE and GREEN or is always BLUE or GREEN, you should increase the iRig
Mic Studio input gain by rotating the level control clockwise.
•IftheLEDissometimesflashingRED you should decrease the iRig Mic Studio input level by rotating the gain
control counterclockwise.
•Whenyourlevelsettingisoptimal,theLEDshouldalternatebetweenGREEN and ORANGE while you talk or
sing.
Usage note
The frequency response of iRig Mic Studio features a slight boost in the top-end at about 7-10kHz. This bump
adds definition and clarity, creating a pleasant presence in your recordings, much like listening to the recorded
signal right next to your ear. The mid and lo-mid range of iRig Mic Studio features a smooth and linear response
that‘s very well suited for recording voices as well as acoustic instruments, giving an accurate recording of the
sound source.
Signal flow
iRig Mic Studio employs only quality electronic components. Its studio-quality diaphragm (the mic capsule)
converts sound into electrical energy which is then amplified as accurately as possible and with minimal
coloration. This signal is then passed off to the microphone’s digital conversion circuitry which converts the
analog signal into digital data. All these features make iRig Mic Studio the ideal microphone for recording no
matter whether you’re capturing vocals, acoustic instruments or electric instruments in a studio or using it for
podcasts or radio — the possibilities are endless.
BLUE
RED
GREEN / ORANGE
GAIN
To Next Page
Loading...
Need help?
General
