Need help?Do you have a question about the IK Multimedia TONEX ONE and is the answer not in the manual?
General| Bypass | True Bypass |
|---|---|
| USB | USB-C |
| Footswitches | 1 |
| I/O | 1/4" instrument input, 1/4" output, Headphone output |
| Connectivity | USB-C |
| Power Supply | 9V DC (center negative) |
| Software | TONEX Software |
| MIDI | Yes |
Edit BASS, MID, TREBLE and VOLUME by rotating the micro and main knobs.
Edit GATE threshold, Compression, Reverb and GAIN by rotating the micro and main knobs.
Press the footswitch to toggle between presets or bypass. Hold to enable the Tuner.
Allows switching between Preset A and Preset B by pressing the footswitch.
Use as a boost/overdrive/distortion/fuzz pedal and bypass using the footswitch.
Set the pedal to dual or stomp mode by rotating the BASS micro knob.
Control cabinet activation on presets by rotating the MID micro knob.
Set input level using the TREBLE micro knob with LED color metering.
Set the pedal's global volume by rotating the main knob in global setup.
Access browsing mode by pressing Footswitch + ALT to view and manage presets.
Protect the pedal from unwanted editing by holding ALT for 3 seconds.
Access tuner by holding footswitch; toggle mute/thru with ALT.
Browse and transfer 25,000+ Tone Models and Premium Collections.
Use librarian to edit parameters, transfer presets, backup, and update firmware.
Integrate TONEX into your DAW for re-amping and finding tones.
Press the librarian tab to access the librarian interface.
Select hardware, backup, restore library, and update firmware.
Visualize, categorize, and access presets and tone models.
Quickly filter presets and tone models.
Assign presets to active slots for dual and stomp modes.
Store presets on the TONEX ONE pedal.
Transfer presets between computer and pedal.
To Next Page