Need help?Do you have a question about the IK Multimedia AmpliTube X-DRIVE and is the answer not in the manual?
General| Brand | IK Multimedia |
|---|---|
| Model | AmpliTube X-DRIVE |
| Category | Music Pedal |
| Language | English |
Selects X-DRIVE models and navigates menus.
Browses and saves presets, choosing name and bank position.
Accesses model-specific parameters and global/preset setups.
Controls the amount of clipping in the distortion circuit.
Adjusts low, mid, high frequencies, and output level respectively.
Indicate preset status (active, edited, browsing, bypassed).
Engage/bypass presets, access X-MODE, or navigate banks.
Connect instrument, amplifier, or stomp box.
Auxiliary output for cabinet simulation and headphone monitoring.
Connect external MIDI controllers and devices.
Connect expression or footswitch pedals for parameter control.
Connect to computer for audio interface and preset management.
Connects to a 9V DC center negative power supply.
Assign parameters to external pedals to create modulations.
Set up double switch pedals for bank or preset navigation.
Tube-like overdrive with creamy saturation and warm low end.
Based on BOSS MT-2, for extreme gain and sustain.
Based on Marshall Guv'Nor, for '80s-era distortion.
Based on ProCo Rat, for smooth crunch to extreme shred sustain.
Based on BOSS DS-1, versatile for subtle crunch to high distortion.
Based on BOSS SD-1, iconic overdrive for subtle to over-the-top tones.
Based on Ibanez Tube Screamer, boosts mid frequencies.
Based on MXR Distortion+, for light overdrives to dense distortions.
Versatile model for creamy jazz and crunchy blues.
Increases instrument level and adds harmonics for solo parts.
Treble booster for presence and sparkling highs.
Aggressive, sample-rate altered distortion.
Fuzz with octave-down effect for wicked tones.
Octavia-style fuzz with octave-up effect.
Classic germanium fuzz vintage effect.
Sustain and buzz-saw distortion.
Change how preset names are displayed on the screen.
Select the type of external pedal connected to EXT. CONTROL.
Set operative mode for double switch pedals (bank/preset navigation).
Initiates the calibration process for connected expression pedals.
Configure MIDI channel operation and MIDI signal routing.
Adjust master, auxiliary, and interface mode volumes.
Set MIDI CLOCK source and configure USB OUT routing.
Activates or deactivates ground lift to remove buzzes.
Choose bypass technology and set pedal for live or interface use.
Reset pedal to factory status or view firmware version.
Enable or disable external control for the current preset.
Start assigning external control pedals and creating macros.
Table mapping parameters to MIDI control change numbers.
Highlights core functionalities like DSP, algorithms, and connectivity.
Lists items included in the product box.
Physical specifications of the AmpliTube X-DRIVE pedal.
To Next Page